● Made in Bangladesh ● Trusted by International Buyers Since 2018
● Made in Bangladesh ● Trusted by International Buyers Since 2018
Move freely through changing conditions.
Softshell designed around your brief.
Sampling time
Established in Bangladesh
Team size from our factory profile
Your artwork, labels and packing
THE PRODUCT
Define the intended activity and climate with your Softshell Jackets Manufacturer in Bangladesh before choosing materials. A light commuter layer, a fleece-backed work jacket and a hooded outdoor style need different warmth, stretch and ventilation. State whether the wearer needs wind resistance, light water shedding or a tested higher protection level.
Review the complete jacket over its intended underlayer, with the front closed and the hood adjusted where specified. Check reaching and seated movement together, so fabric stretch does not substitute for a properly balanced pattern.
Fit the sample over the planned underlayer. Ask the wearer to reach, bend and raise both arms. Check shoulder and elbow mobility, hem lift, hood coverage and access to pockets. Agree with your Softshell Jackets Manufacturer in Bangladesh how movement and weather claims will be evaluated on the finished garment, not just a fabric swatch.
Give your Softshell Jackets Manufacturer in Bangladesh finished chest, shoulder, sleeve, body and hem measurements with tolerances. Define grade rules for hood, pockets and zipper length. Check movement in the smallest and largest sizes rather than scaling only the base sample.
Identify the layering allowance and record each approved measurement revision.
YOUR MOVEMENT. YOUR PROTECTION. YOUR BRAND.
Bring fabric system, fit and functional details together in one approved softshell.
Private-label softshell jackets can carry embroidery, rubber badges, branded zipper pullers, woven labels and reflective trim. Provide your Softshell Jackets Manufacturer in Bangladesh with artwork and attachment details for the selected decoration. Check decoration against the bonded layers so stitches, heat or adhesives do not damage the intended performance.
Check decoration on the selected bonded material, including attachment near seams and closures. Review labels and branded hardware on the complete sample for comfort and operation. Retain accepted artwork and component references with the garment so later substitutions receive a practical review.
MOQ per design / colour
Sample lead time
Production lead time
Send a tech pack or sample, intended activity and weather target, bonded fabric specification, stretch direction, hood and pocket drawings, zipper details, finished size chart, artwork, colour-size quantities and destination. Review a worn sample with your Softshell Jackets Manufacturer in Bangladesh and document any performance tests before bulk approval.
Separate movement corrections from material or testing comments. Record the specific concern before revising the sample.
Confirm the corrected sample and any supported test claims with your Softshell Jackets Manufacturer in Bangladesh in writing. Retain the current size chart, material certificate, pattern, hardware and packing files for production.
Keep the accepted softshell article, finished jacket and component references together with a dated approval. Record the bonding or backing version used and any agreed test reports. Review changed material on a complete garment, checking seam behaviour, movement and closure balance. Do not transfer performance claims automatically between similar-looking fabrics. Treat a new finish, hood or cuff construction as a recorded revision before accepting repeat production.
Work backward from target arrival through freight, packing, sewing, cutting, fabric and testing approvals. Custom bonding or hardware may lengthen the critical path.
Confirm how material variants and sizes are identified on garment labels and packs. Review folding or hanging on the actual jacket, including protection for zippers and adjusters. Agree carton assortments before packing so the receiving team can distinguish backing or shell variants without guessing their contents.
Planning begins at 300 pieces per style and colour with suitable matching stock fabric. Custom bonded fabric may require around 2,000 pieces. The quotation confirms the actual minimum.
Yes. Send a reference and finished size chart. Test shoulder, chest, sleeve and hem mobility while wearing the intended underlayer.
Review the complete jacket over the intended underlayer, checking reaching, seated comfort and sleeve movement separately. Identify whether a restriction comes from pattern balance, the backing or the chosen closure before requesting a correction. Keep the sample size and material article with your comments. Fabric stretch does not automatically establish a suitable armhole or torso fit. Compare the revised sample with the same layering brief, preserving accepted details and recording any change to hood, cuff or hem construction.
Provide badge or embroidery artwork, label sizes, placement and packing files. Check attachment against the bonded fabric and approve a finished sample.
Specify fixed or removable hood, front zipper, storm guard, cuffs, hem and pocket positions on a technical drawing. Test their function on the garment.
No. Protection depends on the selected fabric system, seam construction and test results. Do not claim full waterproofing without suitable testing and approved specifications.
Sampling is estimated at 10–15 days. At the applicable MOQ, production may be planned for 15–30 days after PP approval and material readiness. Custom bonding or specialist trims may extend the final quote; freight is separate.
Agree folding or hanging, zipper protection, bags, barcodes, size stickers, carton assortments and shipping marks before dispatch.
Retain the accepted pattern, fabric article, test records, sample, hardware and artwork files. Recheck availability and changes before repeat production.
Share activity, weather target, size chart, bonded fabric, hood, zipper, pockets, artwork, size-colour quantities, packing and destination.
Provide the selected shell system, backing or membrane reference, intended activity and layering allowance with colour and size allocations. Identify closures, pockets and decoration, plus the specific tests needed for any planned performance claim. Do not rely on a general softshell description to establish protection. Explain packing and hardware protection early. Keep the latest drawing and size chart together, marking undecided material or construction choices separately so the estimate covers the actual finished jacket you plan to receive.
Softshell jacket manufacturing in Bangladesh begins by defining how the outer layer will be worn. A company field team, a commuter and a trail user can all request a softshell, yet their needs for stretch, warmth and weather resistance differ. Share the intended activity, climate, underlayer and season before choosing material. These answers guide the silhouette, hood, pocket arrangement and construction. For custom softshell jackets, a clear performance brief matters more than a vague promise of technical fabric.
Provide front, back and inside views with finished chest, shoulder, body, sleeve and hem measurements. Show where stretch panels, vents and reinforcements belong. If you supply an existing garment, identify the parts to retain and those to change. A reference is a starting point, not a substitute for an approved size chart. Try the sample over the intended base or midlayer.
Keep a current technical file for each style and colour with your Softshell Jackets Manufacturer in Bangladesh. Identify the fabric article and bonded construction, hood pattern, zipper, pocket bags, label and packing requirements. When a buyer changes a membrane or front closure, review fit, test claims, price and lead time again. Documented decisions make later production and repeat orders more dependable.
Stretch softshell fabric can allow a closer fit without locking the shoulders. A bonded softshell fabric also adds thickness, so seam allowances, cuff folds and zipper edges need a sample check. Fleece-backed softshell jackets may feel warmer but can increase bulk beneath the arms. Lightweight softshell jackets can avoid that bulk, though they may not meet the same warmth target. Select a material system for the intended wearer rather than assuming one cloth can serve every collection.
Test movement before approving the shape. Ask the wearer to reach forward, raise the arms, bend and walk with the jacket zipped. Watch for hem lift and pressure across the upper back or elbows. Check that the hood turns with the head and does not block vision. Pocket openings should remain accessible while moving. These observations are more useful than a static front photograph.
Weather-resistant jackets require specific claims. Water repellency at the surface is not the same as waterproofing of the whole garment. Seams, zippers and openings can admit water even if fabric testing looks strong. Ask your Softshell Jackets Manufacturer in Bangladesh for test results supporting any proposed claim, with the conditions stated clearly. If complete waterproof protection is needed, develop and test an appropriate membrane and seam construction rather than describing an ordinary softshell as fully waterproof.
Hooded softshell jackets need a defined opening, depth, brim and adjustment system. Fit the hood with the collar and zipper closed. Test whether the drawcord or toggle is comfortable and securely attached. A removable hood introduces additional snaps or a zipper and changes the collar finish. Confirm these details with your Softshell Jackets Manufacturer in Bangladesh before cutting so the sample and bulk garment follow the same design.
Pocket placement should match the wearer’s use. A chest pocket, hand pocket and internal pocket need different access and protection. Draw their opening dimensions and bag depth; indicate if the wearer needs access with gloves. If the jacket is for field work, test a lightly loaded pocket for pull and distortion. Secure stress points and inspect their symmetry.
Zippers, storm guards, cuffs and hem adjustments influence comfort as well as protection. Confirm zipper tape and puller, flap overlap, cuff closure and hem cord location. Ventilation can help manage heat, but a new opening may alter the intended weather performance. Test the completed garment with all functional parts operating, and document any tradeoff in the approved brief.
Private label softshell jackets can include embroidery, rubber badges, reflective details, branded zipper pullers, woven labels and hangtags. Give your Softshell Jackets Manufacturer in Bangladesh artwork at the final size with exact placement marked. Decoration on a bonded fabric may affect stretch, puncture the protective layer or require heat. Agree a safe attachment method through sampling rather than assuming every branding technique fits every material.
Approve the actual zipper, toggles, tapes and reflective trims on the garment. Colour and finish should match the signed reference, and trims must function after the agreed care trial. If a supplier proposes a substitute, compare its operation and durability before approval. Keep component codes and a trim card with the pre-production sample for consistent inspections.
The GINETEX care-symbol reference explains textile-care marks. Final care instructions should follow testing of the bonded cloth, decorations and hardware. Agree size labels, barcodes, folding and carton marks early. For export softshell jackets, product identification must remain accurate even when several colours and fabric systems share a collection name.
Bulk softshell jackets may be planned from 300 pieces per style and colour when suitable matching stock fabric is available. Custom bonded fabric may require around 2,000 pieces. Your Softshell Jackets Manufacturer in Bangladesh should confirm the actual minimum in a product-specific quotation. A simple unlined stretch jacket, a fleece-backed uniform layer and a membrane garment need different materials, tests and trims, so they should not share an automatic quote.
Sampling is estimated at 10–15 days after the measurements, materials, artwork and components are ready. At the applicable MOQ, production may be planned for 15–30 days after pre-production approval and material readiness. These are working ranges, not arrival guarantees. Custom bonding, specialist zippers, performance testing and additional sample revisions can extend the schedule. International freight remains a separate step.
Ask your technical outerwear supplier for a timeline that includes material receipt, testing, cutting, sewing, inspection and packing. Work backward from the destination and planned arrival date. If the buyer changes a weather claim or selects a new membrane, request a revised test plan, sample, price and delivery estimate. A written revision record avoids treating a changed product as the original order.
Your Softshell Jackets Manufacturer in Bangladesh should conduct quality checks for wholesale softshell jackets against the approved sample, specification and test requirements. For workwear softshell jackets, measure agreed chest, shoulder, sleeve, body and hem points over the expected uniform layer. Examine bonding, panel direction, stitching, hood movement, closure operation and pocket reinforcement. Any approved weather-performance claim should be supported by the relevant test record rather than a visual guess.
Agree whether each jacket is folded or hung and how hardware is protected. Provide size stickers, barcodes, polybag details, carton assortments and shipping marks. Check that zipper pullers and badges do not mark neighbouring coated panels. Verify packed colour and size quantities against the purchase order and destination files before dispatch.
Repeat supply depends on retaining the accepted pattern, fabric article, test results, sample, hardware, artwork and packing files. If a bonded fabric changes, reassess stretch, warmth, care and weather claims. A new backing or membrane can alter fit and seam behaviour even when the outer face looks similar. Confirm any new MOQ or lead-time implications before booking the repeat. Controlled records help a softshell jacket factory reproduce what the buyer actually approved.
YOUR NEXT SOFTSHELL COLLECTION
Send a brief to a Softshell Jackets Manufacturer in Bangladesh: wearer, bonded fabric, performance target, fit, hood, closure, pockets, branding, quantities and destination.
300 / 2,000 Pcs · Matching stock / custom bonded fabric per style / colour, subject to quote
10–15 days · Sampling
15–30 days · Production at applicable MOQ after PP approval
The quotation confirms the minimum and schedule. Freight is separate.
Discuss on WhatsApp ↗
+880 1712396281
Send your softshell reference, intended activity, fabric and performance target, hood, pockets, closure, measurements, branding, quantities and destination for a product-specific review.
Include the intended activity, climate and underlayer, with any test requirements clearly identified. We can discuss the softshell sample against those priorities, recording unresolved material, closure, fit and presentation choices before production approval.