● Made in Bangladesh ● Trusted by International Buyers Since 2018
● Made in Bangladesh ● Trusted by International Buyers Since 2018
COLLECTION / 6-PANEL CAPS
A familiar silhouette.
Details made for your brand.
Choose a 6-Panel Caps Manufacturer in Bangladesh when you need the crown, fit and branding developed around a clear reference. Six joined panels do not automatically produce the same depth or front profile: the pattern, material and support all matter. Send a physical cap or measured drawing, explain who will wear it and show the logo at its intended size. We will review the front seam, visor position, adjustment and inside finishing during sampling. Include quantities by colour, packing requirements and delivery destination in your brief. Your quotation will confirm the applicable minimum and schedule for that specification, with the final PP cap retained as the production reference.
576 Pcs
Planning minimum per colour/style with suitable stock fabric; custom fabric may require 5,184 pcs; quotation confirms
10–15 DAYS
Sampling time
15–30 DAYS
At applicable MOQ after PP and material approval; quantity and custom components can extend timing
Established in Bangladesh
Team size from our factory profile
Your artwork, labels and packing
THE PRODUCT
Begin with the shape you actually want to sell. A six-panel cap may sit close to the head or have a taller front, and the same circumference can feel different when crown depth changes. Mark your measuring points, front height, side depth, visor dimensions and back opening. Decide whether the front needs support or should settle softly. Check where the six seams meet at the top and how the front seam follows the centre line. Give the sample maker a worn reference as well as flat measurements. This helps distinguish deliberate styling from an unwanted imbalance that only becomes obvious when someone puts the finished cap on.
The centre seam deserves attention before approving embroidery or a patch. Artwork that looks balanced on a flat file can shift visually once it crosses a raised join on a rounded crown. Try the actual logo on the chosen fabric, backing and support, then inspect the cap worn normally. Look for readable lettering, even placement and a front that has not been pulled out of shape. Review the visor attachment and top-button position at the same time. Keep comments in one revision list rather than approving the logo separately from the crown. A complete decorated sample provides a more useful bulk reference than disconnected component photographs.
PRODUCT SPECIFICATION
Record the six-panel pattern, circumference range, crown depth, front height and seam positions. Identify the top detail, ventilation, back opening and measuring method. Send front, side, rear and inside views of your reference cap. Choose a supported or relaxed front deliberately, then approve the fit on a wearer rather than relying on a product name to describe every construction detail.
Specify fabric composition, article, weave, weight, shade and finish together with the support material. Cotton and polyester versions may need different handling to hold the intended crown. Define visor width, projection, insert, underside, stitch rows and curve separately. Flat brim 6-panel caps and curved brim 6-panel caps should each have their own physical reference; a drawing alone cannot show the finished balance.
Confirm the closure type, adjustment range, strap width and tail arrangement. Choose the sweatband, inside seam tape, labels and any extra trim by article, not by appearance alone. Position branding in relation to the centre seam and visor. Test hardware and inspect what touches the forehead. Put packing and colour allocation in the same brief so the sample and quotation describe one complete product.
Build the sample around measurable choices. Send crown dimensions, cloth, visor, closure and artwork together, with quantities by colour and your destination.
BRAND DETAILS
Private label 6-panel caps work best when small details are agreed before bulk cutting. Set label positions, seam tape, sweatband, closure finish, hangtag and pack against the same approved cap. Keep artwork files versioned and identify any differences between colourways. We can discuss embroidered logos, patches and compatible prints during sampling, without assuming every method suits every surface. Retain the final combination so repeat orders have a reliable reference for fit, appearance and inside comfort.
Make decisions on the assembled cap. Confirm the depth, visor, closure, material and decoration, then record how each colourway will be labelled and packed. Discuss the stock or custom material route early: it can change both the applicable MOQ and development timing. Your quotation and signed PP cap should describe the same specification. If a detail changes later, review its effect on fit, appearance, cost and schedule before treating it as an equivalent replacement.
Plan from 576 pieces per colour/style when suitable stock fabric is available. A custom fabric route may require 5,184 pieces per colour/style. Sampling is estimated at 10–15 days after the brief and necessary materials are ready. Production at the applicable MOQ is planned at 15–30 days after PP approval and material readiness. Larger quantities, new trims or custom development can take longer. These are planning figures, not a guaranteed delivery date; the quotation confirms your order and freight needs separate allowance.
MOQ per design / colour
Sample lead time
Production lead time
Send the cap reference, crown measurements, fit range, material article, visor details, closure and decoration files first. Add labels, pack instructions, quantities per colour and the destination. Tell us what the sample must demonstrate, such as a particular front height or a readable logo across the centre seam. Include any required testing method and acceptance criteria rather than using a general performance description. We can then review the pattern and component choices together, record sample revisions and retain the final PP version. That sequence keeps the price and production plan tied to your actual six-panel cap rather than to assumptions made from a catalogue picture.
Compare the cloth with its support, sweatband and artwork on a sewn crown. Material weight alone does not describe how a six-panel cap will sit. The weave, finish and seam allowance can change the front and top junction, while the visor insert changes the overall balance. Approve shade, hand and inside comfort together. If a wash or other finish is requested, trial the complete combination and record any measurement change. Claims about performance need specified requirements and evidence; they should not be inferred from a fibre name.
Cotton 6-panel caps can be developed with smooth twill or a brushed surface, depending on the intended hand. Compare the exact articles and weights, then inspect seam bulk, front shape and logo clarity. A brushed finish may soften fine lettering visually. Keep the approved fabric and shade reference with the decorated PP cap, including any agreed care trial, so substitutions can be evaluated meaningfully.
Polyester 6-panel caps need the same careful review of fabric article, weight, surface and finishing route. Check sewing appearance, needle marks and decoration compatibility on the actual cloth. Do not assume that polyester alone establishes a moisture or outdoor performance claim. Define and verify any requested property separately. Examine the crown with its visor and sweatband fitted, then retain the exact approved component combination.
Canvas and textured cloth can give the cap a different hand, but also change the top seam junction and front appearance. Review bulk, surface direction, stitch visibility and how the crown settles. A textured material may need a different logo size to keep lettering clear. Use the selected cloth in the sample and approve its panel orientation. Record those choices before cutting, especially across several colourways.
Inside components affect how the cap feels after the first impression. Compare sweatband width, seam-tape finish, label edges and closure hardware on the complete sample. Check the visor insert for the intended curve and firmness. Try the adjustment without pulling the crown sideways, and inspect the strap tail. A similar-looking replacement may behave differently, so keep approved articles identifiable and assess substitutions before production.
Fit, front shape and decoration should be approved together.
Inspect the sample from front, side, rear and inside, then try it on with the closure set for normal wear. Compare crown depth, visor alignment, front support and the top seam junction with the brief. Look at logo position across the centre seam and check for puckering around dense stitching. Test adjustment at both ends of the intended range, and inspect sweatband comfort. If care testing is specified, repeat the agreed checks after that trial. Record corrections with measurements and reference photographs. Once the revision is accepted, keep a signed PP cap, artwork version and component list as the common reference for cutting, sewing, inspection and packing.
Agree crown dimensions, front support, cloth, visor, closure, inside trim, logo and pack before the sample starts. Identify every colour and quantity, and mark the measurement method. Explain which parts of your reference are essential and which can be discussed. Flag custom fabric or hardware early because development may sit outside the sewing period. A complete brief makes both costing and sample comments more specific.
Try embroidered 6-panel caps with the actual logo rather than a temporary substitute. Check lettering, stitch density, placement and the effect on crown shape. Review patches or prints in the same way. Inspect the front seam and visor centre line together, then test the fit and closure. Consolidate corrections into one dated list and review the revised complete cap before approving the version for production.
Retain the final PP cap with the approved fabric article, shade, support, visor, closure, artwork, labels and pack. Sign and date the specification so different teams do not work from different samples. Any component replacement needs review for its effect on the cap. Include the carton allocation and artwork version in the handover. Repeat orders can then start from a recorded product instead of reconstructing old choices from photographs.
BUYER PROGRAMMES
A retail six-panel collection needs a consistent silhouette across its colours. Choose crown depth and visor shape to suit the rest of your range, then check branding from ordinary viewing distance. Approve the hangtag, label and retail pack with the cap. If fabric articles differ between colours, sample the relevant versions rather than assuming that one cloth proves the fit of every option.
For clubs and company merchandise, start with the wearer and the logo requirements. Decide whether the cap needs a firm front or a softer everyday shape. Share artwork versions and quantities by colour so placement and packing can be checked together. A short event deadline still needs a realistic sample and freight plan; confirm the schedule before relying on a required arrival date.
Uniform ranges benefit from a defined fit range and clear identification. Agree how caps will be adjusted, labelled and distributed alongside the clothing. Review shade against your approved reference and specify acceptable differences where materials vary. Check inside comfort as well as the visible logo. Record replacement and repeat-order details so future quantities can be compared with the same approved cap rather than a generic style name.
ORDER AND DELIVERY
Identify each colour, logo version and pack arrangement before finishing. Agree whether caps need individual bags, protective inserts, retail tags or grouped packing. Check that the selected method protects the visor without changing its approved curve. Carton marks and quantities should match the allocation sheet. Review a packed sample when presentation matters, and keep its arrangement in the production record so dispatch does not introduce a new interpretation.
Allow for factory production, freight, customs and destination handling separately. The production estimate begins after the agreed approvals and material readiness, not simply when an enquiry is sent. Tell us the required arrival date and destination so the transport options can be discussed realistically. Clarify the shipping terms, responsibilities and necessary documents in the quotation. Packing, carton dimensions and total quantity may affect freight choices, so confirm them before booking rather than treating transit as part of the sewing lead time.
The planning minimum is 576 pieces per colour/style with suitable stock fabric. Custom fabric may require 5,184 pieces per colour/style. Send the material, crown, artwork and colour allocation so we can confirm the applicable minimum in your quotation. Special components can change the route; these figures are not a guarantee for every specification.
Yes, we can discuss a supported front or a softer crown around your reference. Structured 6-panel caps and unstructured 6-panel caps need their own pattern and material decisions. Share front height, depth and fit measurements. We will review the assembled cap on a wearer instead of assuming that the construction name establishes its finished shape.
We can review the proposed artwork across the front seam during sampling. The result depends on size, stitch detail, cloth and support. Small lettering or a dense design can need adjustment. Approve the decorated cap for readable detail, placement and crown shape before treating a flat artwork proof as sufficient for bulk production.
Share your preferred curve, visor width, projection and underside, together with the closure reference. Adjustable 6-panel caps can use an agreed strap or adjuster suitable for the brief. Review hardware, adjustment range and strap-tail handling on the complete sample. Closed-back or sized alternatives need their own fit specification and quotation.
Begin with the exact article, weight, composition, shade and intended hand. We can discuss cotton, polyester and selected textured cloth around the crown and logo. Compare them in a sewn sample with inside trim attached. Any requested technical property needs a defined requirement and appropriate verification; a material name alone does not establish performance.
Sampling is planned at 10–15 days after the brief and required materials are ready. Production at the applicable MOQ is planned at 15–30 days after PP and material approval. Quantity, custom cloth, new trims or decoration development can extend timing. Your quotation confirms the schedule, and shipping and customs require separate allowance.
Include label artwork, positions, hangtags and pack instructions with the cap specification. We can review those details alongside seam tape, sweatband and closure. Approve the complete retail version so inside finishing and presentation match the same sample. Identify any colourway differences and carton allocation before production rather than adding them at dispatch.
We review quantities, carton allocation, packing requirements and destination with the order. Discuss shipping terms, transport method and document responsibilities in the quotation. Freight timing is separate from factory production. For 6-panel cap export packing, confirm how the visor and crown will be protected and review the packed arrangement when it forms part of your retail presentation.
Send a cap reference or measured drawing, crown dimensions, fit range, fabric, visor, closure, logo files, label details and quantities by colour. Add the destination, required arrival date and pack instructions. Explain any tests you need. These details let us discuss your actual specification and sample plan rather than quote from an incomplete product name.
A familiar cap shape can still hide a lot of decisions. As you compare a 6-Panel Caps Manufacturer in Bangladesh, start with the product you want the customer to wear rather than a broad style label. Six panel caps can differ in depth, front height, visor balance and inside construction. A measured reference gives those choices a starting point. Tell us which details must stay and where you are open to alternatives, then provide quantities by colour and the destination.
The first useful question is how the cap should sit. Check circumference together with crown depth and the back opening. A cap that measures correctly around the band may still sit too high above the ears or press at the front. Try the sample with its normal closure setting and view it from the side as well as the front. Compare the result with your intended wearer, not just a photograph taken on a display form.
Keep the pattern, fabric and support in the same review. A different cloth can change the top seam junction or make the front settle differently, even if the measurements remain unchanged. Record the final components and measuring method beside the approved sample. This is especially useful for custom 6-panel caps with several colourways, because similar-looking materials may not behave alike. Your quotation should describe that approved combination, including decoration, labels and pack, so the cost and production plan refer to one identifiable product.
The choice between a supported and relaxed crown is a fit decision as well as a visual one. Structured 6-panel caps can keep a defined front, while unstructured 6-panel caps may settle more closely to the wearer. Neither description tells you the full pattern. Front height, side depth, seam allowance, support article and cloth all influence the finished cap. Decide on the result you want first, then review the construction that produces it.
Look closely where the seams meet at the top. Uneven joining or excessive bulk can make the crown look off balance. Check the centre seam against the visor and back opening, and compare both side views. If eyelets or a top button are specified, inspect their positions on the actual sample. Contrasting panels can make small differences more visible, so they deserve their own review rather than approval from a single plain version.
Closure settings can also change the apparent shape. Try the cap at the smaller and larger ends of the agreed range without over-tightening it. Check whether the strap or adjuster pulls the back unevenly, then inspect the front for distortion. Keep the corrected pattern and component list with the PP cap. When a later order changes material or branding, use that record to decide what needs another trial. Reusing a product name does not establish that the new combination will fit like the previous one, and a quick physical comparison can prevent an avoidable mismatch.
Material selection should answer a product question. If you are developing cotton 6-panel caps, compare the chosen twill or brushed article for hand, shade and seam bulk. Polyester 6-panel caps need the same article-level review, especially around decoration and support. Weight and fibre content are useful specifications, but they do not show the whole wearing shape. Use the selected cloth in a complete sample before deciding that an alternative is equivalent.
Visor details deserve separate measurements. Flat brim 6-panel caps and curved brim 6-panel caps differ in presentation, but width, projection, insert and underside still need to be defined for each. Compare the visor from front and side, check its attachment at the crown and inspect the stitch rows. A change in insert firmness can affect both the curve and how the cap feels when worn. Retain the accepted version as a physical reference instead of describing it only as flat or curved.
For private label 6-panel caps, inspect the less visible components too. Sweatband width, seam tape, label edges and closure finish contribute to the customer’s experience. Specify the exact articles where consistency matters and keep a dated component list. If care information is needed, discuss the intended treatment and consult the official GINETEX care-symbol guidance when preparing appropriate instructions. That reference explains symbols; it does not certify your cap or replace the testing and requirements relevant to your own materials and selling market.
The front centre seam can make branding development more demanding than a flat artwork proof suggests. For embroidered 6-panel caps, trial the actual file on the selected crown, backing and support. Look at fine lettering, stitch density, puckering and the way the design sits across the join. A logo can be centred by measurement yet look different when the cap is worn. Compare the decorated sample from an ordinary viewing distance before approving it.
Patch 6-panel caps need the same practical check. Confirm patch size, edge, attachment method and position in relation to the seam and visor. A firm patch may change a softer front, while an attachment that looks neat from outside may leave unwanted bulk inside. Review the forehead area and inside finish with the branding fitted. If a print is proposed, establish compatibility with the actual fabric and finish rather than treating every surface as interchangeable.
Put artwork revisions in a single dated list. Include dimensions and placement measurements, then retain the accepted file version with the PP cap. Different colourways can need different thread or patch colours, so identify those explicitly on the allocation sheet. Do not approve shape from one sample and decoration from another unless their final combination has been reviewed. Consistent branding comes from an approved whole product, not simply from sending the same logo file again. Any change to the cloth, support or decoration should prompt a check of how those parts interact before bulk begins.
Wholesale 6-panel caps need a clear material route before the minimum and timing are treated as fixed. The planning starting point is 576 pieces per colour/style with suitable stock fabric. Custom fabric may require 5,184 pieces per colour/style. Share the shade, article, closure and artwork so the quotation can confirm the applicable minimum for your order. Special components and dedicated development may affect the plan; a general MOQ is not approval of every possible specification.
Sampling is estimated at 10–15 days once the brief and necessary materials are ready. Use that stage to answer specific questions about crown depth, front support, logo readability, adjustment and inside comfort. Consolidate corrections and inspect the revised complete cap. Retaining the final signed PP item gives the production team a reference that can be measured and compared. It also avoids conflicting approvals scattered across messages and different sample versions.
Bulk 6-panel cap production at the applicable MOQ is planned at 15–30 days after PP approval and material readiness. Larger quantities, custom cloth, hardware development or complex branding may need more time. Discuss changes before relying on the original estimate. Factory production is not the same as arrival at your warehouse, so separate transport, customs and destination handling from that period. Confirm the schedule, responsibilities and shipping terms in writing. A realistic order plan ties quantity and timing to the approved product rather than using the fastest figure as a promise for an unfinished specification.
Adjustable 6-panel caps should be reviewed across the intended wearing range. Check strap width, closure operation, back opening and how the tail is managed. Try the cap without pulling the crown out of balance, then inspect the components after normal adjustment. A closure chosen mainly for its appearance still needs to suit the fit brief. Record its approved article and finish so replacements can be compared with the same standard.
Before packing, identify colours, artwork versions, label details and quantities on a clear allocation sheet. Decide whether the cap needs an individual bag, tag, insert or another protective arrangement. Review the packed sample where retail presentation matters, and check that the method does not flatten the crown or alter the visor curve. Carton quantities and marks should match the agreed instructions. The dispatch review needs that same specification rather than a new description made at the end of production.
Repeat orders are easier when the approved product remains identifiable. Keep the PP cap, measurements, fabric article, shade reference, support, visor, closure, decoration file and packing record together. Note substitutions and review their effect before bulk starts. If the new order changes colours or quantities, confirm whether the existing material route remains available. Tell us the destination and required arrival date again, because freight conditions and order size may differ. This record supports a practical comparison with the previous order without assuming that a six-panel style name alone guarantees the same fit, hand or presentation.
YOUR NEXT HEADWEAR COLLECTION
Send your reference to a 6-Panel Caps Manufacturer in Bangladesh with crown dimensions, fabric, visor, closure, artwork, quantities and destination.
576 Pcs · Planning minimum with suitable stock fabric; custom fabric may require 5,184 per colour/style
10–15 days · Sampling estimate
15–30 days · At applicable MOQ after PP and material approval
Your quotation confirms the minimum and schedule. Allow separately for freight and customs.
Discuss on WhatsApp ↗
+880 1712396281
LET’S WORK TOGETHER
Share the six-panel crown reference, fit measurements, fabric, visor, closure and artwork you want to develop. Add colour quantities, label and packing details, destination and required arrival date. We will review the complete specification with you before confirming the applicable minimum, sample plan and production timing for your own cap collection.