● Made in Bangladesh ● Trusted by International Buyers Since 2018
● Made in Bangladesh ● Trusted by International Buyers Since 2018
Freedom to reach.
A kit that stays together.
Sampling time
Established in Bangladesh
Team size from our factory profile
Your artwork, labels and packing
THE PRODUCT
REACH, TURN, LAND.
Approve the complete kit in real court movement.
MOQ per design / colour
Sample lead time
Production lead time
Plan for 500 complete jersey-and-shorts sets per design and colour. Material, graphics, personalisation and packing are confirmed in the final quotation.
Yes. Document each colourway and artwork version separately. Approve the finished set for each version before production.
Supply a locked roster with spelling, number and assigned size. Approve front and back scale on representative garments.
Provide print-ready artwork and colour references. Review a printed panel and a finished sewn kit before approval.
Review selected courtwear knits for weight, airflow, drape, opacity, print response and care.
Sampling may take 10–15 days from a complete brief and production at applicable MOQ 15–30 days after PP and material approval. Confirm by quotation; freight is separate.
Provide source artwork and specifications for each mark or label. Approve placement on the actual garment.
Fit jerseys and shorts together in representative sizes, checking reach, armhole coverage, waistband and leg mobility.
Send both garment specifications, graded charts, fabric, colourways, logo files, roster, quantities, squad allocations and destination.
Basketball uniforms manufacturing in Bangladesh should begin with the player’s actual court movement. A club, academy or label needs more than an attractive flat sketch: it needs a coordinated jersey and shorts set that stays comfortable while players shoot, pivot, jump and defend. Custom basketball uniforms therefore start with two garment briefs, a common colour plan, a size range and a clear team identity package. Decide early whether the order is for competition, practice, school distribution or retail.
Have representative players wear the complete set. A sleeveless jersey needs enough room to reach and shoot without gaping or pulling across the chest. Shorts need stable waist tension, useful stride clearance and a length suited to the team’s preference. Watch both pieces while a player moves rather than judging them separately on a table. Record the tested sample size, material and every requested correction.
An approved kit file should retain the two patterns, grade rules, fabric articles, colour reference, neckline, armhole and waistband construction, artwork, roster and packing allocation. If a later season changes only a sponsor mark or colourway, identify that change explicitly. A controlled reference keeps repeat orders consistent without assuming that a new roster or age group has identical fitting needs.
Basketball jersey and shorts sets may use lightweight knits, but lightness is only one consideration. Compare air passage, drape, opacity, surface stability, stretch and care response. A fabric that feels airy in a swatch may become too transparent under strong court lighting. Check the actual sewn sample, including side panels and the hem, before selecting the production article.
Sublimated basketball uniforms require a panel map that respects pattern shapes and grade changes. Review printed material and a sewn set. Lines should meet coherently at side seams, and a sponsor or mascot must not distort near an armhole. Test colour against the approved physical reference rather than assuming a screen preview will match fabric. The jersey and shorts may need separate print settings even when they belong to one kit.
Where different knits are used for the top and bottom, compare them side by side under consistent light. A nominally identical blue can appear lighter on mesh or a brushed surface. Keep an approval record for each fabric and artwork version. Confirm how a colourway will look after the agreed care process, especially when transfers, embroidery and printed areas share a garment.
Basketball uniform size grading must account for wide armholes, sleeveless shoulders, long torso proportions and active shorts. Basketball uniform armholes deserve their own fitting check, especially while both arms are raised. Name the jersey chest, length, shoulder, neckline and armhole measurement points. Name shorts waist, hip, rise, inseam and opening points separately. Set tolerances and fit representative small, middle and large sizes so an attractive base sample does not hide a poor grade at either end.
Basketball player names and numbers should come from a locked roster that includes spelling, number, size and team allocation. Specify number dimensions and locations for front, back and shorts where needed. Check the smallest jersey for adequate clear space and the largest for proportion. Personalisation can shift visually when the garment is worn or stretched; review a finished player sample.
Youth basketball uniforms need their own fitting review. Reducing an adult pattern can produce an armhole that exposes too much or a torso length that overwhelms the shorts. Have the intended wearer group try the actual materials. Verify waistband recovery, neck comfort and the freedom to raise both arms. Record any youth-specific grades before placing bulk quantities.
Private label basketball uniforms may carry a neck print, size tab, care label, sponsor mark, club crest and retail packing. Supply approved source art, dimensions, colour and location for each element. A team logo can be correctly coloured but still sit too close to a neckline or number. Inspect the mark on a sewn garment at a representative size, not only on a digital layout.
Club basketball uniforms for multiple squads need careful version control. Label home, away and training art distinctly; use a single approved roster version for each group. Keep player sizes and numbers tied to the same version so decoration and packing do not mix seasons. Where a private label buyer supplies hangtags or barcodes, approve those files together with the uniform specification.
The GINETEX textile-care symbol reference explains established care marks. Final instructions should reflect the chosen knit, print, applied logos and waist materials after relevant testing. Confirm origin and size labelling for the destination market. Good labels make a kit easier for both a club equipment manager and a retail customer to maintain.
Wholesale basketball uniforms are planned as complete jersey-and-shorts sets. A working minimum of 500 sets per design and colour provides a starting point for discussion, not a promise for every fabric or decoration. Bulk basketball uniform sets with several colours, custom-dyed material, extensive numbers or individual packing require a product-specific quotation. Supply the exact split by size, team and version.
Sampling may take 10–15 days from a complete brief. At the applicable MOQ, production may take 15–30 days after PP sample and material approval. These are planning windows, not guaranteed arrival dates. Changes to armhole shape, roster, fabric, print art or set packing can affect the sequence. Transport and customs clearance must be planned separately from factory time.
Share the tournament start, product launch or school delivery date early. Work backwards through arrival, transport, packing, final checks, decoration, sewing, cutting, print and sample approval. Lock artwork and roster before personalised production. When a late player change is unavoidable, confirm what can still change and document any schedule effect.
A basketball uniforms factory should inspect the top and shorts against their separate approved patterns. Measure representative sizes and review fabric shade, neckline, armhole binding, waistband, seams, print registration and opacity. Check every team logo, sponsor, player name and number against the locked art and roster. Complete-kit checks can reveal mismatched sizes or colourways that isolated piece inspections would miss.
Basketball team kit packing should fit the receiver’s distribution method. Decide whether sets are grouped by player, squad, size or retail SKU. Mark each bundle clearly with the jersey and shorts size, colourway and roster allocation when applicable. Count sets against the purchase order and packing list, then confirm carton marks before shipment. A club should not need to sort loose jerseys and shorts after delivery.
For export basketball uniforms and repeat orders, retain the two graded patterns, fabric approvals, print files, label details, roster rules and pack plan. A new team name or sponsor file needs its own check even where the fit remains unchanged. Confirm the current minimum and lead time for each new order. Reliable repeat supply comes from traceable approvals, not from assuming all seasons are the same.
YOUR NEXT COURT KIT
Send a brief to a Basketball Uniforms Manufacturer in Bangladesh: court use, jersey and shorts specs, fabric, charts, colours, logos, roster, set count and destination.
500 Sets · Planning minimum per design / colour, subject to quote
10–15 days · Sampling estimate
15–30 days · Production estimate after PP approval
Final MOQ and timing depend on the approved specification. Freight is separate.
Discuss on WhatsApp ↗
+880 1712396281