● Made in Bangladesh ● Trusted by International Buyers Since 2018
● Made in Bangladesh ● Trusted by International Buyers Since 2018
Layer for movement.
Finish every detail.
Sampling time
Established in Bangladesh
Team size from our factory profile
Your artwork, labels and packing
THE PRODUCT
REACH. ZIP. LAYER.
Approve shoulder movement, hardware and fit in the complete jacket.
MOQ per design / colour
Sample lead time
Production lead time
Plan for 500 pieces per design and colour. Shell fabric, lining, hood, hardware, decoration and packing must be reviewed in the final quotation.
Yes. Specify hood dimensions, shell and trim requirements or packing method, then test the complete sample.
No protection level should be assumed. Define a measurable requirement and review fabric, finish and test evidence before making any claim.
Provide size, location, opening direction and hardware specification. Check access and operation on a worn sample.
Compare selected stretch woven, ripstop or softshell articles for weight, movement, surface, finish and care.
Plan 10–15 days for sampling from a complete brief and 15–30 days for production at the applicable MOQ after PP and material approval. Confirm by quotation; freight is separate.
Provide artwork, positioning, trim and care requirements; approve application on the chosen shell.
Measure finished chest, shoulder, sleeve, body and hem, then fit representative sizes over the intended layers.
Send activity, reference, shell target, fit, layering, sleeve, hood, zipper, pocket, chart, artwork, quantities and destination.
Performance jackets manufacturing in Bangladesh begins with what the garment must do. A running warm-up, a team travel layer and a light everyday shell do not share one fit or fabric requirement. Describe climate, activity, underlayers and storage needs before drawing the silhouette. Custom performance jackets should have a reference, finished measurement chart, shell requirement and trim schedule. That specification gives developers a measurable starting point rather than a broad name.
Fit the complete jacket over the intended base layer. Training shell jackets should be tested while the wearer reaches forward, raises both arms and turns. Observe shoulder restriction, sleeve ride-up, hem movement, hood visibility and how easily pockets can be reached. Note the fabric article and tested size. A static front photograph does not establish comfort during movement or the function of hardware.
Keep the accepted shell, pattern, lining, zipper, hood, cuff, art and packing details together. When a repeat order changes one component, that record shows what must be tested again. A similar-looking shell may have a different hand or seam response. Traceable decisions help activewear buyers preserve the approved jacket rather than slowly changing it by substitution.
Stretch woven performance jackets can offer a light outer layer when fabric and construction suit the activity. Compare actual materials for weight, extension, return, surface, drape and seam behaviour. A woven shell, ripstop, bonded softshell and knit-panel design will each behave differently over a base garment. Review the selected article as a complete sample with its lining, pockets, zipper tape and elastic.
Lightweight running jackets should be assessed in the conditions for which they are intended. If the brief requests water repellency, wind resistance or breathability, define a test and required evidence. Fibre content alone cannot prove protection. A coating or finish can change hand feel and care. Discuss claims before ordering shell fabric, and avoid putting unverified language on a label or product page.
Layering changes ease at chest, shoulder and sleeve. Try the garment over the actual shirt or fleece the customer expects to wear. A fit that feels generous without underlayers may restrict shoulder rotation with them. Balance shell weight, mobility and packability to the approved purpose rather than assuming every technical fabric is suitable for every climate.
A performance jacket hood needs an approved depth, face opening, collar relationship and adjustment method. Check sight lines and whether the hood moves with the head. Define full-zip hardware, slider, guard and garage before sampling. Performance jacket zippers must operate smoothly when the garment is worn, and pocket openings should be accessible without interrupting arm movement or branding.
Sleeve construction influences reach. Compare a conventional sleeve with any proposed articulation or raglan line on a wearer. Check cuff position and bicep ease through movement. A drawcord hem or adjustable cuff should secure the intended fit without distorting the silhouette. For packable performance jackets, physically fold a sample into the designed pocket and check zipper orientation.
Performance jacket size grading needs named chest, shoulder, sleeve, body length, bicep, cuff and hem points with tolerances. Fit representative small and large jackets over underlayers. A hood that looks balanced on the base size may be too deep elsewhere. Review pocket height, sleeve pitch and hem adjustment across the range before the grade is accepted.
Private label performance jackets may use heat transfers, embroidery, reflective detail, branded zipper pulls and coordinated packing. Confirm application compatibility with the chosen shell, especially where heat or needle holes affect a finish. Position artwork away from zippers, pockets, high-friction seams and ventilation zones where practical. Review the decorated sample after the agreed care process.
Team performance jackets can share a visual system while using different size blocks or shell weights. Retain the artwork, placement dimensions, thread or transfer colour and accepted reference. Check the smallest and largest sizes; a large chest logo can dominate a narrow panel. A reflective detail should be described as a design element unless its performance has been tested to a stated standard.
The GINETEX textile-care symbol reference explains recognised care marks. Determine final instructions using the shell, lining, coating, zipper and decoration actually approved. Document origin, size, barcode and pack format before bulk production. Product claims and labels must reflect evidence for the completed garment, not an assumption drawn from one component.
Wholesale performance jackets should be quoted against a complete construction. The working minimum is 500 pieces per design and colour, subject to the final quotation. Custom shell development, special finishes, lining, complex hood or trim sourcing may change the feasible minimum. Bulk performance jackets planning therefore needs a bill of materials, not just a mood board and target price.
Sampling may take 10–15 days from a complete brief. At the applicable MOQ, production may take 15–30 days after PP sample and material approval. These are planning windows, not promised delivery dates. Sourcing a specialist zipper, revising sleeve mobility or changing artwork can extend the process. Confirm freight, customs and final delivery separately from manufacturing time.
Provide target arrival and destination at the first inquiry. Work backwards through shipping, packing, inspection, finishing, sewing, cutting, shell allocation and sample decisions. Keep fit and trim approvals in writing. If a buyer changes the hood, zipper or pocket layout after a sample, identify the required resampling and revise timing before bulk authorisation.
A performance jackets factory should compare production with the accepted shell, pattern and finished reference. Measure chest, shoulder, sleeve, body and hem by size. Inspect shade, seams, zipper function, pocket symmetry, hood construction, cuff balance and art placement. Operate adjusters, then review the garment on a wearer where practical. Hardware and fit need their own checks; a clean visual inspection is not enough.
Export performance jackets need clear separation by style, fit, shell, colour and size. Agree fold, bag, sticker, barcode and carton assortment before packing. Count garments against the approved size breakdown rather than relying only on carton totals. A receiving team should be able to identify a lined shell and an unlined training layer without opening every unit.
For repeat orders, retain graded measurements, pattern, shell article, finish, lining, zipper model, hood, pocket, cuff, artwork, labels and packing file. Test replacements instead of treating similar-looking components as identical. Confirm the current MOQ and production plan each time. Reliable export performance jackets come from recorded approvals and a clear path for reviewing product-specific changes.
YOUR NEXT ACTIVE OUTERWEAR COLLECTION
Send a brief to a Performance Jackets Manufacturer in Bangladesh: activity, shell, layering, fit, sleeves, hood, zippers, pockets, chart, artwork, quantity and destination.
500 Pcs · Planning minimum per design / colour, subject to quote
10–15 days · Sampling estimate
15–30 days · Production estimate after PP approval
Final MOQ and timing depend on the approved specification. Freight is separate.
Discuss on WhatsApp ↗
+880 1712396281